Description of 6100 Series Coriolis Mass Flow Controller and Meter
Mass flow meters based on the Coriolis principle are highly appreciated for their accuracy and independence from the properties of the fluid.
The Biosflow 6100 series is a precise mass flow meter/controller for measuring gas and liquid flows up to 207 bar(a) and is virtually insensitive to pressure and temperature variations.
The Biosflow 6100 series Coriolis mass flow meter/controller can measure flow rates ranging from 40g/h to 300kg/h. It contains a uniquely shaped single-loop sensor tube that forms part of an oscillating system. As the fluid flows through the tube, the Coriolis force causes a variable phase shift that is detected by the sensor and fed back to a high-speed microprocessor PC board for processing, which produces an output signal that is strictly proportional to the mass flow rate.
The Biosflow 6100 series is a true mass flow meter/controller that measures mass flow, regardless of the nature of the gas or liquid. A high accuracy proportional control valve and a flexible readout are used within the system to measure and control gas and liquid flows.
All instruments in the Biosflo 6100 series offer unmatched accuracy and zero stability in demanding low-flow applications. They can simultaneously measure multi-parameters such as mass or volume flow rate as well as density and temperature of the output fluid.
Biosflows 6100 Series Coriolis Mass Flow Controller and Meter
6100 Series Coriolis Mass Flow Controller and Meter Size
Features of 6100 Series Coriolis Mass Flow Controller and Meter
1. Higher-precision measurement and control
0.2% reading for liquids
0.5% reading for gases
Turndown ratio better than 75 : 1
(optional:100:1/200:1)
2. Wider flow range
Min:40 g/h for liquids
Max:300 kg/h for liquids
Min:0.53 SLM for gases (N2)*
Max:4000 SLM for gases (N2)*
3. Multiple communication options
Traditional 0-5 Vdc and 4-20mA analog options
as well as RS232/RS485 digital communications
are available(Modbus RTU protocol).
4. Multi-parameter multi-function output
Direct mass flow measurement
Independent of fluid properties
Additional density and temperature outputs
5. Optional
1)High pressure rating – up to
3000 psi (g)/207 bar (g)
2)Water/dust-resistant:ip65
6. High-definition touch screen
Display of flow rate, total and measuring
unit. Defining a set point.
6100/6101D series only)
7.Biosflow UCS Software
Efficient device management with the
free software:
View flow rate & cumulative flow
Change set pointsChange set
Change set communication address
Visualization of measured data communication mode
Adjusting control parameter
Datalogging
Change digital / analog
communication mode
Multiple 6100 devices can be controlled
at the same time
Application of 6100 Series Coriolis Mass Flow Controller and Meter
1) Semiconductor
2) Photovoltaic industry
3) Fuel cell
4) Vacuum industry
5) Analytical instruments
6) Heat treatment
7) Surface treatment
8) CHEMICAL. PLASTICS, METAL
AND GLASS INDUSTRY
9) Experimentalapparatus
10) Food, Beverage and Pharma
11) Automobile electronics
12) Bioprocessing & Bioreactors
